Studies on polycyclic aromatic hydrocarbons in two sediment cores from the huaxi reservoir,china: Assessment of levels,sources, and ecological risk

This study investigated the levels, sources and ecological risks of 16 polycyclic aromatic hydrocarbons (PAHs) in two sediment cores that were collected along the Huaxi Reservoir. The spatial distributions and residue levels of the 16 priority PAHs in the sediments from the Huaxi Reservoir were analyzed for their potential ecological risk, source apportionment and contribution to the total PAH residue. The concentration level of the total PAHs (TPAHs) was in the range 1805 ng·g^?1 to 20023 ng·g^?1 based on dry weight, and the content of PAHs in the Huaxi Reservoir exhibited a gradual upward trend. The PAH congener ratios fluoranthene/(fluoranthene + pyrene) and indeno[1, 2, 3-cd]pyrene/(indeno[1, 2, 3-cd]pyrene + benzo[g, h, i]perylene) were used to identify the source. The main source of the low molecular weight PAHs was wood and coal combustion, whereas the high molecular weight PAHs were primarily from petroleum combustion sources. The results of an ecological risk assessment demonstrated that ACE poses a potential ecological risk, while FLU, NAP, ANT, BaP, DBA, PHEN and PYR can have serious ecological risks.     

CHemical and Biological Assessment of an Urban, Estuarine marsh in Northeastern New Jersey USA

Oritani Marsh in the Hackensack Meadowlands of urbanized northeastern New Jersey USA was assessed in 2000 for vegetation, soil/sediment chemistry, abundance/diversity of benthic invertebrates, and bird and mammal usage. Vegetatively, both marsh and uplands are dominated by tall, dense Phragmites australis. Small patches (less than 2 hectares total) dominated by Spartina spp. were found at the lowest elevations. Soil/sediment cores were sliced into 5 intervals and analyzed for metals, pesticides and volatile/semivolatile organic compounds. Thirteen locations had at least one chemical above Long et al.’s [Environmental Management, 19, 1995, 81--97] “Effects Range-Median” (ERM). Seven metals and nine organics exceeded ERM in at least one sample, with mercury showing the most exceedances. The surface 15 cm interval was generally more contaminated with metals than the 15 to 30 cm interval; the reverse was true for semivolatile organic compounds. Twenty taxa of benthic macroinvertebrates were collected, with each location producing from 1 to 9 taxa. Abundance ranged from 11 to 3,889 individuals/m². Number of taxa was moderately (r ² between 0.40 and 0.70) negatively correlated with zinc, beryllium, nickel and arsenic concentrations; no other chemical’s r ² was above 0.25. Diversity was moderately negatively correlated with arsenic and beryllium. These correlations were unexpected: zinc, beryllium, nickel and arsenic were not the chemicals found at the highest concentrations relative to benchmarks. Number of taxa, abundance and diversity were moderately (negatively) correlated with elevation; organic carbon was moderately (positively) correlated with abundance. All other correlations were weak (r ² < 0.35). Live traps captured only one mammal species, the meadow jumping mouse. Bird observations revealed 39 species, dominated by a few common species.     

Analysis of polycyclic aromatic hydrocarbons (PAHs) in airborne particles by direct sample introduction thermal desorption GC/MS

The technique of thermal desorption (TD)–GC/MS was evaluated for measuring airborne, 4–6 ring polycyclic aromatic hydrocarbons (PAHs) collected onto quartz filters. TD provides a more readily automated and sensitive alternative to traditional solvent extraction, decreasing the time/cost of analysis and reducing the risk of analyte loss or sample contamination. The developed method was successfully applied to the analysis of PAH standard solutions loaded on sorbent tubes packed with quartz wool and the graphitized carbon black sorbent Carbograph2. The optimized method showed high desorption efficiency over the whole range of target PAHs with good precision, linearity and sensitivity. The proposed method was verified on an urban dust Standard Reference Material (SRM 1649a); the experimentally determined concentrations agreed with the certified ranges (95% confidence limit) for all target compounds except benzo[a]anthracene, which fell just outside the narrow certified range. The desorption efficiency and the reproducibility of the method was evaluated by analysing pieces of real sample filters sampled from urban air for a period of 24 h. The results confirmed the homogeneity of the filter and showed high recovery efficiencies for all target PAHs.     

Preimplantation genetic diagnosis of the fragile X syndrome by use of linked polymorphic markers

Fragile X syndrome is the most common cause of familial mental retardation. The most common mutation is expansion of a triplet (CGG)_n repeat in the 5′ untranslated region of the FMR1 gene on Xq27.3. The expansion is refractory to PCR due to preferential amplification of the smaller allele in heterozygous cells and the high GC content of the repeat and surrounding sequences. Direct detection of the normal parental alleles in preimplantation embryos has been used for preimplantation genetic diagnosis (PGD) of this disorder. However, this approach is only suitable for approximately 63% of couples due to the heterozygosity of the repeat in the normal population. As an alternative we investigated the use of polymorphic markers flanking the mutation to track the normal and premutation carrying maternal chromosomes in preimplantation embryos. Using a panel of 11 polymorphisms, six (CA)_n repeats and five single nucleotide polymorphisms, diagnosis was developed for 90% of referred couples. Multiplex amplification of informative markers was tested in 300 single buccal cells from interested couples with efficiency and allele drop out (ADO) rates ranging from 69% to 96% and 6% to 18%, respectively. Use of this approach is accurate and applicable to a larger number of patients at risk of transmitting fragile X to their offspring. Copyright © 2001 John Wiley & Sons, Ltd.     

A comparison of different lysis buffers to assess allele dropout from single cells for preimplantation genetic diagnosis

Single cell polymerase chain reaction (PCR) for preimplantation genetic diagnosis (PGD) requires high efficiency and accuracy. Allele dropout (ADO), the random amplification failure of one of the two parental alleles, remains the most significant problem in PCR-based PGD testing since it can result in serious misdiagnosis for compound heterozygous or autosomal dominant conditions. A number of different strategies (including the use of lysis buffers to break down the cell and make the DNA accessible) have been employed to combat ADO with varying degrees of success, yet there is still no consensus among PGD centres over which lysis buffer should be used (ESHRE PGD Consortium, 1999 ). To address this issue, PCR amplification of three genes (CFTR, LAMA3 and PKP1) at different chromosomal loci was investigated. Single lymphocytes from individuals heterozygous for mutations within each of the three genes were collected and lysed in either alkaline lysis buffer (ALB) or proteinase K/SDS lysis buffer (PK). PCR amplification efficiencies were comparable between alkaline lysis and proteinase K lysis for PCR products spanning each of the three mutated loci (ΔF508 in CFTR 90% vs 88%; R650X in LAMA3 82% vs 78%; and Y71X in PKP1 91% vs 87%). While there was no appreciable difference between ADO rates between the two lysis buffers for the LAMA3 PCR product (25% vs 26%), there were significant differences in ADO rates between ALB and PK for the CFTR PCR product (0% vs 23%) and the PKP1 PCR product (8% vs 56%). Based on these results, we are currently using ALB in preference to PK/SDS buffer for the lysis of cells in clinical PGD. Copyright © 2001 John Wiley & Sons, Ltd.     

Electroosmotic dewatering of dredged sediments: bench-scale investigation

The Indiana Harbor (Indiana, USA) has not been dredged since 1972 due to lack of a suitable disposal site for dredged sediment. As a result of this, over a million cubic yards of highly contaminated sediment has accumulated in the harbor. Recently, the United States Army Corps of Engineers (USACE) has selected a site for the confined disposal facility (CDF) and is in the process of designing it. Although dredging can be accomplished rapidly, the disposal in the CDF has to be done slowly to allow adequate time for consolidation to occur. The sediment possesses very high moisture content and very low hydraulic conductivity, which cause consolidation to occur slowly. Consolidation of the sediment is essential in order to achieve adequate shear strength of sediments and also to provide enough air space to accommodate the large amount of sediment that requires disposal. Currently, it has been estimated that if a one 3-foot (0.9-m) thick layer of sediment was disposed of at the CDF annually, it would take approximately 10 years to dispose of all the sediment that is to be dredged from the Indiana Harbor. This study investigated the feasibility of using an electroosmotic dewatering technology to accelerate dewatering and consolidation of sediment, thereby allowing more rapid disposal of sediment into the CDF. Electroosmotic dewatering essentially involves applying a small electric potential across the sediment layer, thereby inducing rapid flow as a result of physico-chemical and electrochemical processes. A series of bench-scale electrokinetic experiments were conducted on actual dredged sediment samples from the Indiana Harbor to investigate dewatering rates caused by gravity alone, dewatering rates caused by gravity and electric potential, and the effects of the addition of polymer flocculants on dewatering of the sediments. The results showed that electroosmotic dewatering under an applied electric potential of 1.0VDC/cm could increase the rate of dewatering and consolidation by an order of magnitude as compared to gravity drainage alone. Amending the sediment with polymers at low concentrations (0.5-1% by dry weight) will enhance this dewatering process; however, the optimal polymer concentration and the cost-effectiveness of using polymers should be investigated further.     

A directional passive air sampler for monitoring polycyclic aromatic hydrocarbons (PAHs) in air mass

A passive air sampler was developed for collecting polycyclic aromatic hydrocarbons (PAHs) in air mass from various directions. The airflow velocity within the sampler was assessed for its responses to ambient wind speed and direction. The sampler was examined for trapped particles, evaluated quantitatively for influence of airflow velocity and temperature on PAH uptake, examined for PAH uptake kinetics, calibrated against active sampling, and finally tested in the field. The airflow volume passing the sampler was linearly proportional to ambient wind speed and sensitive to wind direction. The uptake rate for an individual PAH was a function of airflow velocity, temperature and the octanol-air partitioning coefficient of the PAH. For all PAHs with more than two rings, the passive sampler operated in a linear uptake phase for three weeks. Different PAH concentrations were obtained in air masses from different directions in the field test.     

农闲期城郊农田灌溉水中典型污染物含量与评价——以西北江三角洲为例

摸查了农田灌溉系统水环境经农（夏）闲期降水等外部强干预调理后的环境污染物含量——该值理论上是环境自净作用之后的最不利值,对农田灌溉系统水环境进行水质评价,探究其对农田土壤质量的潜在污染风险.于2019年6月中旬—7月下旬（降雨集中期）,分别在西北江三角洲城市（清远市、佛山市和江门市）实验基地周边筛选研究区,并在雨后对有覆水的水源区域、灌渠、蓄水池和田间水等采集上覆水,共采得水样27×2份,对其pH值、悬浮物（SS）、矿化度、总磷（TP）、氨氮（NH₄⁺-N）、Cd、As、Pb、Cu和Zn的含量进行检测;对各研究区pH值、SS的成因和影响,矿化度的等级,重金属均值分布等进行分析;对全样品TP、NH₄⁺-N、重金属含量进行Pearson相关性分析和描述性特征分析;通过单因子水质标识指数P_i和综合水质标识指数P分别对各采样点、各构成项目和各研究区进行水质评价.研究发现雨后农田灌溉系统水环境构成复杂,物质呈无显著性差异的迁移,灌溉沿程上覆水中大部分物质可能处于动态平衡,受局部环境影响变小,TP、NH₄⁺-N和重金属等迁移物质主要还是灌溉水体中原有的,受外力驱动扰动后在水动力作用下可能以氮磷结合形态沿灌溉系统发生远距离迁移;使用河流水质标识指数法评价农田灌溉系统水环境,发现该法可以刻画局部灌溉的水质态势,对农田灌溉系统水环境的含量特征评价做出科学、合理的解释,也可以做出综合性定量评价.虽然灌溉水系统结构差异较大,但是从整体上可以初步得出农闲期西北江三角洲农田灌溉水的灌溉风险不高的结论,总体综合水质评价级别为Ⅰ类~Ⅱ类,达到水环境功能区的使用要求.     

机动车轮胎磨损颗粒物化学组分特征研究

为研究机动车道路行驶过程中轮胎磨损排放的颗粒物理化特性,利用轮胎轮廓仿真磨耗仪,对国内主流17种轮胎胎面进行仿真磨耗实验,获得颗粒物样品,提取并检测其中18种元素和20种多环芳烃（PAHs）的含量.结果显示,元素和PAHs含量因轮胎品牌和速度等级的不同而差异显著.18种元素平均含量为（99.04±68.43）mg/g,占样品总重的9.90%,其中Si（88.97±67.85）mg/g、Zn（6.77±1.64）mg/g和Na（1.05±0.75）mg/g的平均含量均超过1mg/g,Cd的含量最低,为（0.43±0.31）μg/g.20种PAHs含量之和（∑20PAHs）在12.13~433.64 μg/g,平均为（94.13±110.18）μg/g,PY的平均含量最高（30.98±31.27）μg/g,其次是CHR、BaP、FA、PHE和BghiP,平均含量最低的是AC（0.58±0.2）μg/g;从环数看,以4环PAHs为主（占∑20PAHs的45.03%~67.93%）,其次为3环（平均含量为15.45%）和5环（平均含量为12.62%）.总体来说,国外品牌轮胎样品中元素和PAHs含量略高于国内品牌,而主要PAHs环数略低于国内品牌.     

基于BP神经网络的北京城区公园土壤PAHs含量预测

城市公园是城市生态环境的重要组成部分,其环境质量与人类健康息息相关.选择北京市121个城区公园,采集公园土壤样品并分析其中7种多环芳烃（PAHs）含量,评价城区公园土壤中PAHs的含量水平,并基于BP神经网络预测了2020年和2023年土壤PAHs含量.结果表明:北京城区公园土壤中w（PAHs）（7种PAHs总含量）范围为0.033~4.182 mg/kg,低于GB 36600—2018《土壤环境质量建设用地土壤污染风险管控标准（试行）》土壤污染风险筛选值,且7种PAHs的毒性当量浓度（TEQ）均低于世界卫生组织标准值（1 mg/kg）,对人体健康的毒性风险较小.将14个影响指标（8个社会经济因子与6个公园特征因子）作为输入层、土壤w（PAHs）作为输出层,建立BP神经网络的拟合优度达0.845.预测结果显示,2020年和2023年北京城区公园土壤中w（PAHs）范围分别为0.008~0.969 mg/kg和0.022~1.988 mg/kg,整体均低于GB 36600—2018土壤污染风险筛选值,但随时间推移呈上升趋势,尤其朝阳区和海淀区将有大幅增长.研究显示:城市化发展因素对土壤w（PAHs）的增加有明显影响,城市发展进程影响不容忽视;至2023年,北京城区公园土壤若不加管理,其w（PAHs）将持续增长.